wooden stick, cutter, clock movements, cylinder nut(Ø8mm*20mm), tape, scissors, glue stick, super glue, domed acrylic(Ø50mm), headless bolt(Ø5mm*30mm), double-sided tape, circle cutter, extruded PVC sheet(1mm), transparent PVC sheet(0.3mm), cement
Tape around 8 circular PVC sheets.
Tape the PVC sheets to the larger one.
Put the transparent PVC sheet. And drill 4 holes.
Reinforce the mold with a PVC sheet.
Screw headless bolts in these holes.
Put a glue stick on the mold.
Make the small mold.
Drill a hole in the small mold. And test the molds.
Pour about 10mm of cement into the large mold. Then put the small mold.
After 24 hours, carefully remove the mold.
Pour cement into the domed acrylic. Then put cylinder nuts.
After 24 hours, take the cement out of the domed acrylic.
Put together the parts of a clock.
Set nuts well up.